Jason (my cousin) and I were able to get a good start on tearing down the ‘burb tonight. We started by removing the doors.
The “barn door” style rear doors were a cinch to remove only requiring the impact wrench. The rear doors on the sides were also quite easy requiring some trim to be removed, electrical connections disconnected and then removal of the mounting bolts for the hinges.
The front doors on the other hand… After removing the trim on the inside it became evident that the wiring had to be disconnected from the components inside the doors and then fed back through the hole in the door first. Only then could the doors be unbolted.
Once the doors were out, we pulled the glass. This was made very easy with the way the glass was installed at the factory.